煤层顶板硬岩大直径定向钻孔施工关键技术

根据顶板高位定向钻孔快速钻进成孔与工作面卸压瓦斯高效抽采治理需要，针对现有螺杆马达定向钻进技术与分级扩孔方法存在的问题，开展了顶板硬岩定向钻进与大直径扩孔钻进关键技术研究，开发了冲击回转定向钻进技术、扭冲回转定向钻进技术、扭冲旋转扩孔技术以及双级双速扩孔技术等钻孔提速新技术，研制了冲击螺杆马达、矿用小直径扭力冲击器、双级双速螺杆马达、组合式扩孔钻头等配套钻具。综合试验结果表明，硬岩定向钻孔平均机械钻进效率达到8.34 m/h，最高达到13.6 m/h，较常规螺杆马达定向钻进技术提升20%~30%；硬岩大直径扩孔终孔直径达到200 mm，机械钻进效率平均达到5.6 m/h以上，最高达到10.5 m/h。该技术提升了顶板硬岩定向钻进效率与大直径扩孔钻进效率，缩短了顶板高位定向钻孔的综合施工周期，为大直径高位定向长钻孔快速成孔与高效抽采治理回采工作面卸压瓦斯提供了可靠的技术手段。     

Fabrication and mechanical properties of large-scale SiC impeller via vacuum gelcasting and pressureless sintering

Impeller is the key part of centrifugal pump to convey liquid. And combined with the engineering practice, we fabricated two types of open and semi-open SiC ceramic impellers with diameter of 100 mm and 160 mm via gelcasting and pressureless sintering. B4C and C were used as the sintering additives and sprayed drying granulation method was adopted for the starting SiC powder processing. Given the size and shape complexity of impeller, the optimized pH value, dispersant content, and solid-loading content for the fabrication of the SiC impellers were determined to be 10-11, 0.8 wt%, and 40 vol%, respectively. For the open impeller, blade height, cover board thickness, drying shrinkage, and sintering shrinkage are 10.5 mm, 4 mm, 10.3%, and 21.3%, respectively. For the semi-open ones, the corresponding parameters are 41 mm, 10 mm, 10.3%, and 21.3%, respectively. The average density of the two types of impellers is 3.15 g/cm3, and the mechanical properties of both impellers, including average hardness, flexural strength, compressive strength, and fracture toughness are 2478 HV, 436 MPa, 2093 MPa, and 3.17 MPa·m1/2, respectively. All variation coefficient values are smaller than 5%, which indicates a good uniformity in densities and mechanical properties of both the impellers.     

Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

Metals and Materials International - The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500...     

Dissimilar Metal Joining of 304 Stainless Steel to SMA490BW Steel Using the Filler Metal Powders with a High-Entropy Design

Metals and Materials International - High-entropy alloys having excellent properties are particularly suitable for the application as the filler metals in welding. In the present study,...     

计及时间相关性的微能源网鲁棒规划方法

微能源网以能源的梯级利用为原则,可实现风、光等多种新能源的高比例消纳,满足区域内电、热、冷等多种能源需求。微能源网中存在新能源出力与冷、热、电负荷的多重不确定性。为增强系统规划结果的鲁棒性,常采用不确定集表述新能源出力与多种用能需求的不确定性,实现针对微能源网的鲁棒规划设计,往往使系统规划结果过于保守,降低系统经济性。为克服以上问题,规避实际运行中不可能发生的场景,降低系统规划结果的保守性,文章提出一种考虑时间相关性的微能源网鲁棒规划模型。该模型在计及多重源荷不确定性的基础上,进一步考虑新能源出力与冷、热、电负荷的时间相关性。通过算例对传统不确定集与所提出的改进不确定集进行对比分析,验证了所提模型及方法的优越性和有效性。     

Deep and narrow impact: introducing location filtered citation counting

Scientometrics - The present study tests a citation counting method that filters out citations in the introductory and backgrounds sections and then weighs the remaining citations by their in-text...     

基于CFD的池式快堆多物理耦合分析方法研究

基于临界/次临界点堆中子动力学模型、燃料棒传热模型、热交换器和多孔介质等辅助热工水力模型，采用显式迭代和动态链接库技术（DLL），利用商用计算流体力学（CFD）程序FLUENT的用户自定义函数（UDF）实现中子动力学、燃料棒热传导等和快堆堆池冷却剂流动换热的耦合计算，开发池式快堆多物理耦合计算程序CFD/PF。采用CFD/PF开展小型自然循环铅铋快堆SNCLFR-10无保护超功率事故（UTOP）模拟，并与国际知名快堆多物理耦合分析程序SIMMR-III的计算结果开展Code-to-Code对比分析。研究结果表明:CFD/PF与SIMMER-III的分析结果吻合良好，耦合程序的开发取得了初步成功，可用于分析池式快堆堆池内的复杂三维流动和换热现象。      

高精度薄壁钢套类零件制造工艺

薄壁钢套类零件是机械制造中常碰到的一类难加工零件,由于其不同的功能用途和典型结构特点,其制造有一定难度,在实际生产过程中,经常出现加工制造后的零件尺寸精度、形状精度、形位精度达不到使用及设计要求。本文较系统地阐述了薄壁钢套类零件的典型制造工艺方法以及在制造过程中的变形分析和应对措施。     

Detecting Cysteine in Bioimaging with a Near-Infrared Probe Based on a Novel Fluorescence Quenching Mechanism

Near-infrared (NIR) fluorescent probes are very significant for detecting cysteine in biological systems. Herein, we report a highly selective and sensitive NIR turn-on fluorescent probe (BDP-NIR) based on BODIPY with large Stokes shift (105 nm) for detecting Cys. We clarified the sensing mechanism based on the different thiol-induced S_NAr substitution/rearrangement reaction of the probe with cysteine and homocysteine/glutathione, which leads to the corresponding amino- and thiol-BODIPY dyes with distinct photophysical properties. Moreover, a novel mechanism of fluorescence quenching was demonstrated by density functional theory calculation. The reason for the fluorescence quenching of the probe might be intersystem crossing (from singlet to triplet excited state). Moreover, BDP-NIR had a high linear dynamic range of 0–500 μM, which was promising for detecting cysteine quantificationally. Significantly, BDP-NIR was capable of sensing endogenous cysteine in living cells and in vivo.